Brc 300 camera manual

 · Remote Control Unit for the BRC /H /Z /Z /H Before bringing in your unit for service, check the. camera. With three 1/ CCDs, the BRC is an ideal choice for a wide range of video applications. WallVIEW CCU allows the user to adjust color, gain and iris Blue Gain; Aperture; Auto Manual Iris; Gain; Auto One Push White Balance; and Scene Store A B buttons. Tally A tally port is located on the back of the 1 RU interface. which allows the camera to remotely shoot wide areas. † The camera pans and tilts smoothly, even at low movement speed. † The camera pans and tilts quietly, even at its maximum speed of 60 degrees per second. † Up to preset positions can be saved. The PTZ Motion Sync function enables smooth preset operation with coordinated pan/ tilt.

The BRC is a high-performance, high-capacity process controller. It is a rack controller designed to interface with Harmony block I/O, Harmony rack I/O, and S I/O in the Symphony Enterprise Management and Control System. The controller is fully compatible with the INFI 90 OPEN system in functionality, communication, and packaging. EVI-D30, EVI-D70, EVI-D, EVI-HD3V, BRC, BRC and Elmo PTC Pan/Tilt Video Cameras enhances function and value for Teleconferencing, Educational, and Security Applications. P/N 92 - 11 REV. obstructions where the camera is to be mounted. Pick a mounting location to optimize the performance of the camera. INTENDED USE: This Wall Mount was designed, built and tested for use indoors and to support the weight, size and shape of the Sony BRC-H or the WallVIEW camera systems.

manual must be used with this equipment in order to comply with the limits for a computing device pursuant Operating Multiple BRC/P Cameras from. Model: BRC Device Type: Camera CONTROL: Start_RS D Pulse to get the maximum speeds and firmware version for the camera. This only needs to be done once for each camera. CPC_Pan_Joystick A Analog signal from the pan_joy output of the CPC Joystick Camera Control symbol. CPC_Tilt_Joystick A. Robotic Camera Setup The jumpers on the BRC/P that is connected to the switcher must be set as follows: If you are daisy chaining multiple Sony BRC/P Robotic Cameras together, use the following pinouts to connect the one camera to the next. Compatibility Features Trademarks.